Outdoor, 5.15-5.875 GHz, Dual-polarization, 23 dBi, 9 deg, Panel (for AP3620/AP3640/AP3660)

50 ft, LMR600 cable with standard N-type plug and standard N-type jack connectors

6DB ATTENUATOR WITH N-TYPE CONNECTORS

External Dual Band Antenna for AP3620, 2.4/5GHz, 4/5dBi (Spare)

Indoor, 2.4GHz / 5GHz, Quad-feed, 4 dBi, Omni

Access point antenna port terminator (R-SMA plug 50 OHM 1W). Required to terminate unused ports in outdoor installations.

10db attenuator with RSMA connectors

10 ft, LMR240 cable with reverse SMA plug and reverse SMA jack connectors

In/Outdoor, 2.3-2.5 GHz, 18 dBi, 18 deg, Panel (for AP2620/AP3660) - FCC Domain Only

Wall mounting bracket for indoor APs (verify models supported)

Dual-band lightning protector with reverse polarity type-N jack on both ends

Indoor, 2.4-2.5/4.9-5.9 GHz, Triple-feed, 3/4 dBi, Omni, Ceiling (for AP3620)

Outdoor, 2.3-2.7/4.9-6.1 GHz, triple-feed, 5 dBi, 120 deg, sector antenna with reverse polarity type-N jack connector (for AP3660, Requires LMR Cable)

Adjustable drop ceiling rail mounting bracket. Requires WS-MB361020-01 for installation.

Universal mounting bracket adapter for existing installs (Cisco, Aruba, Trapeze, Roamabout) - Refer to manual for specific access point model support

20 inch pigtail with reverse polarity type-N plug to connect AP to lightning protector or directly to antenna

Indoor, 2.4-2.5/5.15-5.875 GHz, Six-feed, 7dBi, 27/30 deg, panel with reverse polarity SMA plug connectors

AP3705i Protruded Drop Ceiling Bracket

20 inch LMR240 pigtail with reverse polarity type-N plug to connect AP to lightning protector or directly to antenna.

Cat5e UTP one foot extension cable, RJ45 male (no boot) straight through to female jack.