Wall mounting bracket for indoor APs (verify models supported)

25 foot LMR600 cable with reverse polarity type-N plugs on both ends

20 inch LMR240 pigtail with reverse polarity type-N plug to connect AP to lightning protector or directly to antenna.

10db attenuator with RSMA connectors

Indoor, 2.4GHz / 5GHz, Quad-feed, 4 dBi, Omni

Outdoor, 2.4-2.5/5.15-5.875 GHz, Six-feed, 10/6 dBi, 55 deg, panel with reverse polarity type-N plug connector

Drop ceiling 9/16rail mounting bracket (verify models supported)

1ft, PFP400 cable with standard N-type plug and reverse polarity N jack connectors

External Dual Band Antenna for AP3620, 2.4/5GHz, 4/5dBi (Spare)

75 ft, LMR400 cable with standard N-type plug and standard N-type jack connectors

OUTDOOR, DUAL BAND, MIMO, 25 DEG N

Adjustable drop ceiling rail mounting bracket. Requires WS-MB361020-01 for installation.

10 ft, LMR240 cable with reverse SMA jack and standard N-type jack connectors

20 foot LMR200 cable with reverse polarity type-N plugs on both ends

Access point antenna port terminator (R-SMA plug 50 OHM 1W). Required to terminate unused ports in outdoor installations.

Outdoor, 5.15-5.875 GHz, Dual-polarization 16 dBi, 60deg, Sector (for AP3620/AP3640/AP3660)

1ft, PFP400 cable with standard N-type plug and reverse polarity N plug connectors

6DB ATTENUATOR WITH N-TYPE CONNECTORS

Standard N-type terminator for outdoor deployments

Indoor, 2.4-2.5/4.9-5.9 GHz, Triple-feed, 3/4 dBi, Omni, Ceiling (for AP3620)