Universal mounting bracket adapter for existing installs (Cisco, Aruba, Trapeze, Roamabout) - Refer to manual for specific access point model support

20 inch LMR240 pigtail with reverse polarity type-N plug to connect AP to lightning protector or directly to antenna.

Indoor, 2.4GHz / 5GHz, Dual-feed, 5 dBi, 120 deg, Sector antenna (not available in the FCC/NAM regulatory domain)

6 foot LMR400 cable with reverse polarity type-N plugs on both ends

Outdoor, 2.4-2.5/5.15-5.875 GHz, Six-feed, 12/11 dBi, 27/30 deg, panel with reverse polarity type-N plug connector (for AP3660, Direct Attach) - FCC Dom...

Outdoor, 2.3-2.7/4.9-6.1 GHz, triple-feed, 5 dBi, 120 deg, sector antenna with reverse polarity type-N jack connector (for AP3660, Requires LMR Cable)

10db attenuator with RSMA connectors

Adjustable drop ceiling bracket for AP3710

50 foot LMR400 cable with reverse polarity type-N plugs on both ends

Outdoor, 2.3-2.7/4.9-6.1 GHz, triple-feed, 5 dBi, 120 deg, sector antenna with reverse polarity type-N plug connector (for AP3660, direct attach)

Access point antenna port terminator (R-SMA plug 50 OHM 1W). Required to terminate unused ports in outdoor installations.

Dual-band lightning protector with reverse polarity type-N jack on both ends

Indoor, 2.4-2.5/5.15-5.875 GHz, Six-feed, 10/6 dBi, 55 deg, panel with reverse polarity SMA plug connectors

Indoor, 2-3-2.7/4.9-6.1 GHz, Triple-feed, 5 dBi, 120 deg, Sector (for AP3620)

Outdoor, 2.4 Ghz, 10dBi, omni baton with reverse polarity type-N jack connector(for AP3660) - FCC domain only

75 ft, LMR400 cable with standard N-type plug and standard N-type jack connectors

Outdoor, 5.15-5.875 GHz, Dual-polarization 16 dBi, 60deg, Sector (for AP3620/AP3640/AP3660)

Wall mounting bracket for indoor APs (verify models supported)

20 ft, LMR200 cable with standard N-type plug and standard N-type jack connectors